Posts Tagged ‘technivorm’

My Technivorm, at home. Yeah, I need a bigger coffee bar.

A customer bought a Technivorm from us yesterday, and asked how *I* use my Technivorm at home.  As I typed my response, I realized that others may be interested in my approach, as it’s a little “unusual”.  Here’s my notes to him:

1. Preheat carafe w hot water
2. I use 75-80 grams pretty finely ground coffee. The scoop with the
machine is 10-11 grams. 7 rounded scoops should be magic.
3. Ok, I use paper filters. There, I said it. My reason is that 80 grams
exceeds mfg recommendation, and gold filter is slower than paper, risking
basket overflow the way I use the basket (keep reading). Plus paper is just
so convenient. The Melitta filters I gave you are the best I’ve found.
4. I use 1 liter (8 cups) cold water, not the full 10 cups. I like my
coffee at about 1.4% total dissolved solids, and this procedure yields
that TDS (I’ve measured it). Since the basket can’t hold much more coffee,
and 10 cups w full basket results in 1.3% TDS, I cut water back to 8 cups.
Most people seem to like their coffee at 1.2 to 1.3% TDS.
5. I start with basket switch closed. Let brewer run till basket is almost
full of water, then open the basket switch to the middle position. Then
cover the basket with its cover to minimize heat loss.
6. I move the basket switch to closed at the end of the brew cycle so it
doesn’t drip on the counter. Probably not necessary if you are patient
enough to allow it to finish completely and or empty the basket right away
– I’m not.
7. Immediately cap the decanter after brewing or decant to thermos.
8 you will not hurt the brewer if you leave the switch on.

Now, full disclosure, I just like my coffee stronger than most, and the
procedure above mimics the result of my $5000 programmable shop brewer.
You could use Technivorm with mfg instructions and get perfectly good
coffee. My procedure just kicks it up a notch. YMMV.


Read Full Post »

I have a confession to make: I haven’t owned an automatic drip coffee maker, or consumed automatic drip coffee (at home, in both cases), in more than a decade.

Sure, I drink “drip” coffee at our shop.  Technically, our FETCO Extractor is a drip brewer.  Of course, any similarity between that machine and a home drip brewer is coincidence.  Or imagined.  I also occasionally make “drip” coffee at home with a manual pour-over cone, but this method is at best a kissing cousin to auto drip, as it requires good technique and is really a PITA, truth be told.

So in the last decade, there has been no automatic drip brewer worthy of gracing my home countertop.  I usually drink espresso at home.  And when I do make something other than espresso, I have at least a half-dozen better devices at my disposal, ranging from a French press to the Royal balance brewer that Jack Nicholson made famous in the movie The Bucket List.  I never needed, or wanted, an automatic drip brewer.

Until this week.

This week, we started stocking the Technivorm drip brewer.  Anybody who has shopped for a high-end home drip machine lately knows about Technivorm.  Handmade in the Netherlands, it is the only home drip brewer endorsed by credible organizations such as Cook’s Illustrated (who accepts no advertising), and the Specialty Coffee Association of America (full disclosure: there may be one or two other brewers endorsed by SCAA, but none that I would have for a variety of reasons).

Even though we stock something, it doesn’t necessarily mean that I want one for home.  Don’t get me wrong – whatever we stock, I try to make sure it’s best of class, but I just don’t need absolutely everything we sell.  I’m here to facilitate your needs, but they may not match mine.  And so I thought it would be with Technivorm – lots of people told me they wanted to buy one, but I couldn’t imagine owning one myself.

Then they sent me a red one.

Our home coffee bar, starring Red Technivorm. Yeah, I need a bigger home coffee bar.

Truth be told, I ordered the red one with the skid we got in last week.  It was a limited edition, and I bought the only one left in the United States.  Honestly, I expected to sell it for Valentine’s Day.  I didn’t expect to be smitten with it myself.  It’s the same thing as the silver ones, just red.

In the end, I had to have it.  Part of the reason is that red is my favorite color.  Partly, it’s because I know there will probably never be another one like it available in the United States.  But neither of those reasons are sufficient for it to warrant precious real estate on my home coffee bar.  No, the real reason I wanted it is that it makes damn good coffee.  Being red was just icing on the cake.

So now I’ve had some opportunity to experiment with it, and I’m to the point where I can make coffee at home that’s indistinguishable from our FETCO-brewed shop coffee.  (This is not just my subjective opinion – I’ve brought home the instrumentation to physically test it.)  My observation is that Technivorm makes excellent coffee right out of the box, following the manufacturer’s instructions.  For 99% of people, that will be good enough.  I, of course, felt the need to press the envelope, and have developed some techniques to put that coffee just over the top.

Here is my guide to making the world’s best drip coffee at home in 6 easy steps:

1. Buy a Technivorm

If we’re talking auto drip machines, this is the only one worth having.  Yeah, you can do pour-over a lot less expensively.  But if you value cleanliness and convenience, this is your only real option.  Not to mention clean cup – the usual substitute for drip is a French press, which is a great method, but you will always have sediment in that cup.  The Technivorm cup is clean, which is great for many highly nuanced coffees.  I know Technivorm is a little pricey, but take comfort in the fact that they have a great track record of durability, a great warranty, and you will save a ton by buying less coffee out of the house.

2. Use More Coffee

Technivorm instructions call for “6 scoops” to brew a full pot.  The scoop they supply yields about 10 grams per scoop, so that’s about 60 grams per pot.  No matter what I did (within reason, and some things outside the bounds of reason), I couldn’t get the total dissolved solids over 1.2% with just 60 grams (1.4% is the target).  No, what I’ve found is that you need 85 grams.

3.  Use a Finer Grind

In addition to more coffee, I’ve found that a finer grind than most people’s auto drip grind is required.  On our Bunn grinders (the kind they have in the supermarket), there is a setting for “drip”, which is slightly finer than the “auto drip” setting.  This setting works pretty well.  Obviously, you’ll need to experiment, but the answer may wind up being “finer than you initially think”.

4.  Use a Gold Filter

Paper filters taste bad.  Period.  I have read all kinds of reviews from all kinds of coffee people making recommendations about which paper filter is least bad.  Invest $30 and get yourself a gold filter.  It’s not as convenient at paper, but it makes a better cup.  And it’s better for the planet.

5.  Agitate at the Beginning of the Cycle

Technivorm has a nice spray head.  Best in class, I would have to say.  But it’s no FETCO Extractor with Cascading Spray Dome, and a basket large enough to bathe a small puppy.  So it still helps to stir the grinds in the first 20 seconds of the brew cycle.  I use a chopstick.  Beyond the first 20 seconds, there is no need to continue agitation.

6.  Use the Funnel Shutoff to Increase Extraction at the End of the Cycle

As you see the last of the water leave the tank, shut off the flow control on the brew basket, and let the water hang in the basket for about 30 seconds.  This increases the TDS about 0.05%.  Doesn’t seem like much, but it’s a difference you can taste.

Now, tips #2, 3 and 5 are a bit of a double-edged sword.  The problem is, following my guidelines, you are pushing the limits of the Technivorm basket.  Be careful not to overflow it, cause that’s a mess.  I recommend you work your way up on the amount of coffee, and work your way down on the grind size till you find the edge yourself, for your setup.  Because I did my experimenting in a shop with a concrete floor and a floor drain.  I wouldn’t want to jump into this too fast over my wooden kitchen floors.

Your mileage may vary, of course, but these are some concepts to help you get absolutely everything out of yout Technivorm brewer.


Read Full Post »

There will be a mandatory price increase effective February 1, 2010.  Buy yours today to take advantage of the lower price.

We will include the Brew-Through Lid with each unit, a $15 value, plus you will get the solid lid which is useful for keeping coffee warm over longer periods.  Buy any coffee with your brewer purchase and we’ll add 25% more at no additional cost.

See our selection of Technivorms here:



Read Full Post »